Resume from tool change

Anything about the V90 or the X90
cantwaittogetone
Posts: 4
Joined: Fri Jun 10, 2016 2:25 pm

Resume from tool change

Postby cantwaittogetone » Tue Aug 30, 2016 11:42 am

I want to be able to resume operation from a tool change or a pause, but I don't want the router to start up with out operator acknowledging (pressing a key)
Here is my code below
It runs the first time and stops at M6 T01 for the tool change
I am looking for some keyboard imput to resume after the tool change



%
G90 G20 G54 G40;
G0 Z1.25;
X-.2497 Y-.7126;
M6 T01;
M3 S6000;
X-3.2635 Y-.5;
G1 F150 Z0.5;
G1 F030 Z0;
x-3.7965 Y-1;
G0 Z1.2;
X-3.7965 Y-.5;
G1 F150 Z0.5;
G1 F030 Z0;
X-3.2635 Y-1;
G0 Z1.25;
X0 Y0;
M5;
M30;
%

beltramidave
Posts: 214
Joined: Fri Aug 21, 2015 8:54 pm

Re: Resume from tool change

Postby beltramidave » Tue Aug 30, 2016 3:50 pm

Insert M00 between your tool change and spindle start. This will stop and wait for a cycle start to resume.

M6 T01;
M00
M3 S6000;


Return to “Legacy V90 & X90 Machines”

Who is online

Users browsing this forum: No registered users and 1 guest