Difference between revisions of "G-Code Files"
From PROBOTIX :: wiki
(Created page with "=Current NC Files directory= file:Nc_files.zip =Using Table Grid files= Small Body files are for the smaller routers including the DWP611 and Bosch Colt. Large Body fil...") |
m (formatting) |
||
| Line 1: | Line 1: | ||
=Current NC Files directory= | =Current NC Files directory= | ||
| − | [[ | + | * [[File:Nc_files.zip]] |
=Using Table Grid files= | =Using Table Grid files= | ||
| − | + | * Small Body files are for the smaller routers including the DWP611 and Bosch Colt. | |
| − | Small Body files are for the smaller routers including the DWP611 and Bosch Colt. | + | * Large Body files are for the larger routers including the PC892, Bosch 1617, Hitachi M12VC, and 80mm spindles. |
| − | + | * Choose the table extents file for your router size and machine size and run using a V bit or 1/16" end mill. | |
| − | Large Body files are for the larger routers including the PC892, Bosch 1617, Hitachi M12VC, and 80mm spindles. | + | * Then run the corresponding threaded inserts file using a 1/8" end mill. |
| − | + | * Holes are sized for 1/4-20 barbed inserts. | |
| − | Choose the table extents file for your router size and machine size and run using a V bit or 1/16" end mill. | + | |
| − | + | ||
| − | Then run the corresponding threaded inserts file using a 1/8" end mill. | + | |
| − | + | ||
| − | Holes are sized for 1/4-20 barbed inserts. | + | |
Latest revision as of 11:00, 12 June 2018
Current NC Files directory
Using Table Grid files
- Small Body files are for the smaller routers including the DWP611 and Bosch Colt.
- Large Body files are for the larger routers including the PC892, Bosch 1617, Hitachi M12VC, and 80mm spindles.
- Choose the table extents file for your router size and machine size and run using a V bit or 1/16" end mill.
- Then run the corresponding threaded inserts file using a 1/8" end mill.
- Holes are sized for 1/4-20 barbed inserts.