Difference between revisions of "Table"
From PROBOTIX :: wiki
| Line 1: | Line 1: | ||
| − | Here is a simple, inexpensive, yet effective way to build a table to support, your Comet, Meteor, or Asteroid | + | Here is a simple, inexpensive, yet effective way to build a table to support, your Comet, Meteor, or Asteroid. You can sometimes find monitor arms on eBay like the one we are using on our Test Rig. |
| − | + | <gallery mode="packed-overlay"> | |
| + | File: Table_1.jpg | 1 | ||
| + | File: Table_2.jpg | 2 | ||
| + | File: Table_3.jpg | Feet | ||
| + | File: Table_4.jpg | Test Rig | ||
| + | </gallery> | ||
| + | # Start by cutting two 45's on the 4x4 legs. | ||
| + | # Then drill holes and pound 5/16 tee nuts into them. | ||
| + | # Then carriage bolts allow you to level the table. | ||
| + | # 1x4's complete the frame and MDF provides a nice smooth surface to support the machine. | ||
| − | + | [[File:GX-building-a-table.jpg]] | |
| − | + | ||
| − | [[ | + | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Latest revision as of 14:20, 24 January 2019
Here is a simple, inexpensive, yet effective way to build a table to support, your Comet, Meteor, or Asteroid. You can sometimes find monitor arms on eBay like the one we are using on our Test Rig.
1
2
Feet
Test Rig
- Start by cutting two 45's on the 4x4 legs.
- Then drill holes and pound 5/16 tee nuts into them.
- Then carriage bolts allow you to level the table.
- 1x4's complete the frame and MDF provides a nice smooth surface to support the machine.
