Page 1 of 1

Laser Depot USA 600x400 60W Laser

Posted: Mon Feb 22, 2016 10:24 am
by rayk2
I recently purchased a 60W laser from Laser Depot USA. I am able to utilize Aspire to create designs, then export the designs via DXF into the laser software. Works great. The laser works very well - did not have to make any adjustments after it was delivered. My only complaint is that the software LaserWorks 8.0 originates from China and was obviously written by an interpreter as the language within the manual can be difficult to follow.

Re: Laser Depot USA 600x400 60W Laser

Posted: Thu Jul 14, 2016 9:15 pm
by colin56
Consider yourself fortunate. Trouble abounds if you do a cursory Laser Depot USA review of the
owners past laser startup failures. They might offer 2 or 3 year warranties but their company might
survive months. In past 3 years they're have been 4 or 5 companies. So, if you need any part get it
now rather than later.

http://www.sawmillcreek.org/showthread. ... aser-Depot

LaserCut has notoriously been a buggy, chinese laser interface from my experience. You can get help in forums if Laser
Depot bails, however.

Last I checked Rabbit Laser USA and APlazer offer lasercut and leetro control card combo on
their laser machines as well.