Page 1 of 1

Extra (6th input) on PBX-BB??

Posted: Fri Jan 08, 2016 9:10 am
by 9600
Hello,

We have a PBX-BB that we're using to control a plasma cutter and need a 6th input, so that we'd then have the following inputs in total:

* X home
* Y home
* Z home
* ESTOP
* Touch off ("ohmic sensor")
* ARC OK

Any suggestions for the best way to go about this, e.g. cut tracks/lift pins etc., would be appreciated.

Regards,

Andrew