joint 0 on limit switch error

Anything about the V90 or the X90
booktagon
Posts: 5
Joined: Sun Nov 15, 2015 5:33 pm

joint 0 on limit switch error

Postby booktagon » Sun Nov 15, 2015 6:19 pm

As I posted earlier about the home all function not homing properly on the X axis, I thought if I manually moved the router to the center, it might somehow reset something. No luck. So I attempted to move all the way to the right. I guess I hit the limit switch. Now the router is stuck far to the right of the X axis, and I get a joint 0 on limit switch error when I try to "home all."

Manual functions do not override this error message.

How do I manually override the error message, re-gain manual control, and move the spindle back to the center of the machine.

Thanks.

booktagon
Posts: 5
Joined: Sun Nov 15, 2015 5:33 pm

Re: joint 0 on limit switch error

Postby booktagon » Sun Nov 15, 2015 6:32 pm

Fixed. Machine still won't home properly the X axis, but I found the override limit checkbox and re-centered the router.


Return to “Legacy V90 & X90 Machines”

Who is online

Users browsing this forum: No registered users and 1 guest