Page 1 of 1

Resume from tool change

Posted: Tue Aug 30, 2016 11:42 am
by cantwaittogetone
I want to be able to resume operation from a tool change or a pause, but I don't want the router to start up with out operator acknowledging (pressing a key)
Here is my code below
It runs the first time and stops at M6 T01 for the tool change
I am looking for some keyboard imput to resume after the tool change



%
G90 G20 G54 G40;
G0 Z1.25;
X-.2497 Y-.7126;
M6 T01;
M3 S6000;
X-3.2635 Y-.5;
G1 F150 Z0.5;
G1 F030 Z0;
x-3.7965 Y-1;
G0 Z1.2;
X-3.7965 Y-.5;
G1 F150 Z0.5;
G1 F030 Z0;
X-3.2635 Y-1;
G0 Z1.25;
X0 Y0;
M5;
M30;
%

Re: Resume from tool change

Posted: Tue Aug 30, 2016 3:50 pm
by beltramidave
Insert M00 between your tool change and spindle start. This will stop and wait for a cycle start to resume.

M6 T01;
M00
M3 S6000;