Page 1 of 1

Help with Unity controller

Posted: Sun Sep 13, 2020 3:03 pm
by Rick_knecht
My Asteroid has run well for three years. However today when i went to start it, the power light illuminates on the controller but there is no fan noise and the stepper motors do not click. LinusCNC states limit errors on all three axis. I I override limits and try to home the machine, the virtual display shows movement, but the physical machine does nothing.

Does the controller have a reset button? any help or direction would be MUCH appreciated.

Rick in Iowa

Re: Help with Unity controller

Posted: Sun Sep 13, 2020 7:56 pm
by Rick_knecht
further info... controller looks fine inside. fuse not blown. no burned areas and no burnt smell.

Re: Help with Unity controller

Posted: Fri Sep 18, 2020 3:04 pm
by Hockeyhead
Rick,

Did you ever get any help on this issue? Wondering if this forum is still actively moderated. Very few posts lately.