Wiring up the Meteor with spindle and Sunfar VFD. There is a Pair of wires coming from the harness with a female spade that Appears to go to the earth ground on the controller.
In the instructions for Unity Controller Ports .....(N) Earth Gnd ... ...it also says.. If using a VFD, ground the machine frame to the VFD earth ground instead.... the spade on the end of those wires won't fit there at all, and I don't have any extra wires ???
Discuss Machine Mechanics Here
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest