Help with Unity controller

Discuss Machine Mechanics Here
Rick_knecht
Posts: 4
Joined: Wed Oct 21, 2015 5:13 pm

Help with Unity controller

Postby Rick_knecht » Sun Sep 13, 2020 3:03 pm

My Asteroid has run well for three years. However today when i went to start it, the power light illuminates on the controller but there is no fan noise and the stepper motors do not click. LinusCNC states limit errors on all three axis. I I override limits and try to home the machine, the virtual display shows movement, but the physical machine does nothing.

Does the controller have a reset button? any help or direction would be MUCH appreciated.

Rick in Iowa

Rick_knecht
Posts: 4
Joined: Wed Oct 21, 2015 5:13 pm

Re: Help with Unity controller

Postby Rick_knecht » Sun Sep 13, 2020 7:56 pm

further info... controller looks fine inside. fuse not blown. no burned areas and no burnt smell.

Hockeyhead
Posts: 26
Joined: Sat Feb 06, 2016 3:59 pm

Re: Help with Unity controller

Postby Hockeyhead » Fri Sep 18, 2020 3:04 pm

Rick,

Did you ever get any help on this issue? Wondering if this forum is still actively moderated. Very few posts lately.


Return to “Machine Mechanics”

Who is online

Users browsing this forum: No registered users and 2 guests