My Asteroid has run well for three years. However today when i went to start it, the power light illuminates on the controller but there is no fan noise and the stepper motors do not click. LinusCNC states limit errors on all three axis. I I override limits and try to home the machine, the virtual display shows movement, but the physical machine does nothing.
Does the controller have a reset button? any help or direction would be MUCH appreciated.
Rick in Iowa
Help with Unity controller
-
- Posts: 4
- Joined: Wed Oct 21, 2015 5:13 pm
Re: Help with Unity controller
further info... controller looks fine inside. fuse not blown. no burned areas and no burnt smell.
-
- Posts: 26
- Joined: Sat Feb 06, 2016 3:59 pm
Re: Help with Unity controller
Rick,
Did you ever get any help on this issue? Wondering if this forum is still actively moderated. Very few posts lately.
Did you ever get any help on this issue? Wondering if this forum is still actively moderated. Very few posts lately.
Who is online
Users browsing this forum: No registered users and 0 guests