|
|
| Line 1: |
Line 1: |
| − | http://www.ebay.com/itm/271301429710
| + | Z-puck_atlas_connections.jpg |
| − | | + | |
| − | | + | |
| − | <pre>
| + | |
| − | ( tool-length-probe.ngc )
| + | |
| − | (this program demonstrates how to measure tool lengths automatically using)
| + | |
| − | (a switch hooked to the probe input. this is useful for machines without)
| + | |
| − | (tool holders, where the length of a tool is different every time it is)
| + | |
| − | (inserted.)
| + | |
| − | | + | |
| − | (g30 should already be set to a position safely above the switch)
| + | |
| − | | + | |
| − | (start with the first tool loaded, and g54 work offsets set with it)
| + | |
| − | (when you touch off the work with this reference tool, be sure length)
| + | |
| − | (comp is off {use g49})
| + | |
| − | | + | |
| − | g20 g90
| + | |
| − | g49
| + | |
| − | g0 x0 y0 z1
| + | |
| − | | + | |
| − | (measure reference tool)
| + | |
| − | g30 (above switch)
| + | |
| − | g38.2 z0 f15 (measure)
| + | |
| − | g91 g0z.2 (off the switch)
| + | |
| − | #1000=#5063 (save reference tool length)
| + | |
| − | (print,reference length is #1000)
| + | |
| − | g90 (done)
| + | |
| − | | + | |
| − | (cut with first tool...)
| + | |
| − | g0 x0 y0 z1
| + | |
| − | g1 z0 f20
| + | |
| − | g2 x0 y0 i0 j.05
| + | |
| − | | + | |
| − | g0 z2
| + | |
| − | (msg,insert another tool)
| + | |
| − | (use TxM6 here if you want to be able to use radius comp too)
| + | |
| − | m0
| + | |
| − | | + | |
| − | (measure next tool)
| + | |
| − | g30 (above switch)
| + | |
| − | g49 (measure without the last tool's offset)
| + | |
| − | g38.2 z0 f15 (measure)
| + | |
| − | g91 g0 z.2 (off the switch)
| + | |
| − | g43.1 z[#5063-#1000] (set new tool offset)
| + | |
| − | (print,new length is #5063)
| + | |
| − | g90 (done)
| + | |
| − | | + | |
| − | (cut in the same place with this next tool...)
| + | |
| − | g0 x0 y0 z1
| + | |
| − | g1 z0 f20
| + | |
| − | g2 x0 y0 i0 j.05
| + | |
| − | | + | |
| − | g0 z1
| + | |
| − | | + | |
| − | (exit with tool length offset still in effect, in case we want to use MDI)
| + | |
| − | m2
| + | |
| − | </pre>
| + | |
Revision as of 08:56, 7 March 2016
Z-puck_atlas_connections.jpg
