Difference between revisions of "HT23-180-8"
From PROBOTIX :: wiki
(→NEMA 23 Blue 180 Oz/In Stepper Motor) |
(→NEMA 23 Blue 180 Oz/In Stepper Motor) |
||
| Line 31: | Line 31: | ||
|1.46 | |1.46 | ||
|1.23 | |1.23 | ||
| − | |-Inductance(mH/phase +-20%) | + | |- |
| + | |Inductance(mH/phase +-20%) | ||
|2.4 | |2.4 | ||
|9.6 | |9.6 | ||
|2.4 | |2.4 | ||
| − | |-Rotor Inertia (g.cm 2) | + | |- |
| + | |Rotor Inertia (g.cm 2) | ||
|300 | |300 | ||
|300 | |300 | ||
|300 | |300 | ||
| − | |-Motor Weight | + | |- |
| − | |0. | + | |Motor Weight |
| − | | | + | |0.7 kg/1.43 lb |
| − | | | + | |0.7 kg/1.43 lb |
| − | |-Motor Length | + | |0.7 kg/1.43 lb |
| − | | | + | |- |
| − | | | + | |Motor Length |
| − | | | + | |56 mm/2.205 in |
| − | |-Number of Wires | + | |56 mm/2.205 in |
| + | |56 mm/2.205 in | ||
| + | |- | ||
| + | |Number of Wires | ||
|8 | |8 | ||
|8 | |8 | ||
Revision as of 11:47, 1 July 2015
HT23-180-8
- High Torque Stepper Motor
- 185 OzIn Hybrid Design
- 1.8 deg / 200 Steps Per Revolution
NEMA 23 Blue 180 Oz/In Stepper Motor
| Description | Parallel | Series | UniPolar |
| Holding Torque (N.m +-10%) | 185 | 185 | 127 |
| Rated Current (Amps/Phase) | 2.5 | 1.3 | 1.8 |
| Resistance (ohm/phase +- 10%) | 0.62 | 1.46 | 1.23 |
| Inductance(mH/phase +-20%) | 2.4 | 9.6 | 2.4 |
| Rotor Inertia (g.cm 2) | 300 | 300 | 300 |
| Motor Weight | 0.7 kg/1.43 lb | 0.7 kg/1.43 lb | 0.7 kg/1.43 lb |
| Motor Length | 56 mm/2.205 in | 56 mm/2.205 in | 56 mm/2.205 in |
| Number of Wires | 8 | 8 | 8 |