Limit Switch Error
From PROBOTIX :: wiki
Revision as of 20:06, 18 April 2016 by Admin (Talk | contribs) (Created page with "If you accidentally drive into a limit switch before homing the machine, no need to panic. :*Click the small white [x] in the lower right corner to clear the error. :*Place...")
If you accidentally drive into a limit switch before homing the machine, no need to panic.
- Click the small white [x] in the lower right corner to clear the error.
- Place a check mark in the box labeled Ignore Limits
- Click the orange Machine Power button
- Then you will have one jog maneuver to get off of the affected switch.
