Actions

Difference between revisions of "LinuxCNC"

From PROBOTIX :: wiki

Line 1: Line 1:
== Setup (not necessary for Comet/Asteroid/Meteor/Nebula) ==
+
Most of the below links will direct you to LinuxCNC's own incredibly helpful wiki.
  
[http://linuxcnc.org/docs/2.5/html/common/System_Requirements.html System Requirements]
+
== Setup ==
 +
This step is not necessary for any of our [[:Category:Galaxy Series|Galaxy]] or [[:Category:GX Series|GX]] series machines as they include a control PC with LinuxCNC already installed and configured.
 +
* [http://linuxcnc.org/docs/2.5/html/common/System_Requirements.html System Requirements]
 +
* [http://linuxcnc.org/docs/2.5/html/common/Getting_EMC.html Getting LinuxCNC]
 +
* [http://www.linuxcnc.org/docs/2.5/html/quickstart/stepper_quickstart.html Stepper Quickstart]
 +
* [http://www.linuxcnc.org/docs/2.5/html/config/stepconf.html Stepper Configuration Wizard]
 +
* [http://www.linuxcnc.org/docs/2.5/html/common/Stepper_Diagnostics.html Stepper Diagnostics]
  
[http://linuxcnc.org/docs/2.5/html/common/Getting_EMC.html Getting LinuxCNC]
+
== Intro Video ==
  
[http://www.linuxcnc.org/docs/2.5/html/quickstart/stepper_quickstart.html Stepper Quickstart]
+
* [https://www.youtube.com/watch?v=NP9asVGftto Customer created LinuxCNC instructional video with Asteroid]
 
+
* [https://vimeo.com/121212918 PROBOTIX Intro to LinuxCNC Video]
[http://www.linuxcnc.org/docs/2.5/html/config/stepconf.html Stepper Configuration Wizard]
+
 
+
[http://www.linuxcnc.org/docs/2.5/html/common/Stepper_Diagnostics.html Stepper Diagnostics]
+
 
+
==Intro Video==
+
 
+
[https://www.youtube.com/watch?v=NP9asVGftto Customer created LinuxCNC instructional video with Asteroid]
+
 
+
[https://vimeo.com/121212918 PROBOTIX Intro to LinuxCNC Video]
+
  
 
== FAQs ==
 
== FAQs ==
  
[http://www.linuxcnc.org/docs/2.5/html/common/Linux_FAQ.html Linux FAQ]
+
* [http://www.linuxcnc.org/docs/2.5/html/common/Linux_FAQ.html Linux FAQ]
 
+
* [[PCI Parallel Port Cards]]
[[PCI Parallel Port Cards]]
+
  
 
== Using LinuxCNC ==  
 
== Using LinuxCNC ==  
  
[http://www.linuxcnc.org/docs/2.5/html/common/userforeword.html User Foreword]
+
* [http://www.linuxcnc.org/docs/2.5/html/common/userforeword.html User Foreword]
 
+
* [http://www.linuxcnc.org/docs/2.5/html/common/user_intro.html LinuxCNC User Introduction]
[http://www.linuxcnc.org/docs/2.5/html/common/user_intro.html LinuxCNC User Introduction]
+
* [http://www.linuxcnc.org/docs/2.5/html/config/copy_and_run.html Running LinuxCNC]
 
+
* [http://www.linuxcnc.org/docs/2.5/html/common/User_Concepts.html Important User Concepts]
[http://www.linuxcnc.org/docs/2.5/html/config/copy_and_run.html Running LinuxCNC]
+
* [http://www.linuxcnc.org/docs/2.5/html/gcode/machining_center.html CNC Machine Overview]
 
+
* [http://www.linuxcnc.org/docs/2.5/html/gui/axis.html Axis GUI]
[http://www.linuxcnc.org/docs/2.5/html/common/User_Concepts.html Important User Concepts]
+
* [http://www.linuxcnc.org/docs/2.5/html/gcode/coordinates.html Coordinate System]
 
+
* [http://www.probotix.com/wiki/index.php/G64 G64]
[http://www.linuxcnc.org/docs/2.5/html/gcode/machining_center.html CNC Machine Overview]
+
 
+
[http://www.linuxcnc.org/docs/2.5/html/gui/axis.html Axis GUI]
+
 
+
[http://www.linuxcnc.org/docs/2.5/html/gcode/coordinates.html Coordinate System]
+
 
+
[http://www.probotix.com/wiki/index.php/G64 G64]
+
  
 
== G-code Programming ==
 
== G-code Programming ==
  
[http://www.linuxcnc.org/docs/2.5/html/gcode/overview.html G Code Overview]
+
* [http://www.linuxcnc.org/docs/2.5/html/gcode/overview.html G Code Overview]
 
+
* [http://www.linuxcnc.org/docs/2.5/html/gcode/gcode.html G Codes]
[http://www.linuxcnc.org/docs/2.5/html/gcode/gcode.html G Codes]
+
* [[G-Code Cheatsheet]]
 
+
* [http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Simple_LinuxCNC_G-Code_Generators G-Code Generators]
[[G-Code Cheatsheet]]
+
 
+
[http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Simple_LinuxCNC_G-Code_Generators G-Code Generators]
+
  
 
== Other ==
 
== Other ==
[http://www.probotix.com/wiki/images/5/5c/G-codes.pdf Printable G-code Quick Reference]
 
 
[http://www.linuxcnc.org/docs/2.5/html/ Complete LinuxCNC Documentation]
 
 
http://www.vdwalle.com/Norte/
 
 
http://gnipsel.com/linuxcnc/index.html
 
 
https://www.youtube.com/watch?v=Bn8T5Fw0ISs
 
  
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Adding_Camview
+
* [http://www.probotix.com/wiki/images/5/5c/G-codes.pdf Printable G-code Quick Reference]
 +
* [http://www.linuxcnc.org/docs/2.5/html/ Complete LinuxCNC Documentation]
 +
* http://www.vdwalle.com/Norte/
 +
* http://gnipsel.com/linuxcnc/index.html
 +
* https://www.youtube.com/watch?v=Bn8T5Fw0ISs
 +
* http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Adding_Camview

Revision as of 19:20, 6 August 2018

Most of the below links will direct you to LinuxCNC's own incredibly helpful wiki.

Setup

This step is not necessary for any of our Galaxy or GX series machines as they include a control PC with LinuxCNC already installed and configured.

Intro Video

FAQs

Using LinuxCNC

G-code Programming

Other