Difference between revisions of "LinuxCNC"
From PROBOTIX :: wiki
(4 intermediate revisions by the same user not shown) | |||
Line 29: | Line 29: | ||
* [http://www.linuxcnc.org/docs/2.5/html/gcode/coordinates.html Coordinate System] | * [http://www.linuxcnc.org/docs/2.5/html/gcode/coordinates.html Coordinate System] | ||
* [http://www.probotix.com/wiki/index.php/G64 G64] | * [http://www.probotix.com/wiki/index.php/G64 G64] | ||
+ | *[http://www.linuxcnc.org/docs/2.6/html/gcode/tool_compensation.html Tool Compensation] | ||
== G-code Programming == | == G-code Programming == | ||
− | * [http://www.linuxcnc.org/docs/2. | + | * [http://www.linuxcnc.org/docs/2.6/html/gcode/overview.html G Code Overview] |
− | * [http://www.linuxcnc.org/docs/2. | + | * [http://www.linuxcnc.org/docs/2.6/html/gcode/gcode.html G Codes] |
* [[G-Code Cheatsheet]] | * [[G-Code Cheatsheet]] | ||
* [http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Simple_LinuxCNC_G-Code_Generators G-Code Generators] | * [http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Simple_LinuxCNC_G-Code_Generators G-Code Generators] | ||
== Other == | == Other == | ||
− | + | *[http://linuxcnc.org/docs/html/man/man9/ HAL Modules] | |
+ | * [http://old-releases.ubuntu.com/ubuntu/dists/ LinuxCNC Archives] | ||
* [http://www.probotix.com/wiki/images/5/5c/G-codes.pdf Printable G-code Quick Reference] | * [http://www.probotix.com/wiki/images/5/5c/G-codes.pdf Printable G-code Quick Reference] | ||
* [http://www.linuxcnc.org/docs/2.5/html/ Complete LinuxCNC Documentation] | * [http://www.linuxcnc.org/docs/2.5/html/ Complete LinuxCNC Documentation] | ||
Line 45: | Line 47: | ||
* https://www.youtube.com/watch?v=Bn8T5Fw0ISs | * https://www.youtube.com/watch?v=Bn8T5Fw0ISs | ||
* http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Adding_Camview | * http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Adding_Camview | ||
+ | *[http://www.vdwalle.com/Norte/Second%20Parport.htm Parallel Ports] |
Revision as of 11:39, 27 February 2020
Most of the below links will direct you to LinuxCNC's own incredibly helpful wiki.
Setup
This step is not necessary for any of our Galaxy or GX series machines as they include a control PC with LinuxCNC already installed and configured.
- System Requirements
- Getting LinuxCNC
- Stepper Quickstart
- Stepper Configuration Wizard
- Stepper Diagnostics
Intro Video
FAQs
Using LinuxCNC
- User Foreword
- LinuxCNC User Introduction
- Running LinuxCNC
- Important User Concepts
- CNC Machine Overview
- Axis GUI
- Coordinate System
- G64
- Tool Compensation