Actions

Difference between revisions of "LinuxCNC"

From PROBOTIX :: wiki

(Created page with "http://www.vdwalle.com/Norte/")
 
(27 intermediate revisions by the same user not shown)
Line 1: Line 1:
http://www.vdwalle.com/Norte/
+
Most of the below links will direct you to LinuxCNC's own incredibly helpful wiki.
 +
 
 +
== Setup ==
 +
This step is not necessary for any of our [[:Category:Galaxy Series|Galaxy]] or [[:Category:GX Series|GX]] series machines as they include a control PC with LinuxCNC already installed and configured.
 +
* [http://linuxcnc.org/docs/2.5/html/common/System_Requirements.html System Requirements]
 +
* [http://linuxcnc.org/docs/2.5/html/common/Getting_EMC.html Getting LinuxCNC]
 +
* [http://www.linuxcnc.org/docs/2.5/html/quickstart/stepper_quickstart.html Stepper Quickstart]
 +
* [http://www.linuxcnc.org/docs/2.5/html/config/stepconf.html Stepper Configuration Wizard]
 +
* [http://www.linuxcnc.org/docs/2.5/html/common/Stepper_Diagnostics.html Stepper Diagnostics]
 +
 
 +
== Intro Video ==
 +
 
 +
* [https://www.youtube.com/watch?v=NP9asVGftto Customer created LinuxCNC instructional video with Asteroid]
 +
* [https://vimeo.com/121212918 PROBOTIX Intro to LinuxCNC Video]
 +
 
 +
== FAQs ==
 +
 
 +
* [http://www.linuxcnc.org/docs/2.5/html/common/Linux_FAQ.html Linux FAQ]
 +
* [[PCI Parallel Port Cards]]
 +
 
 +
== Using LinuxCNC ==
 +
 
 +
* [http://www.linuxcnc.org/docs/2.5/html/common/userforeword.html User Foreword]
 +
* [http://www.linuxcnc.org/docs/2.5/html/common/user_intro.html LinuxCNC User Introduction]
 +
* [http://www.linuxcnc.org/docs/2.5/html/config/copy_and_run.html Running LinuxCNC]
 +
* [http://www.linuxcnc.org/docs/2.5/html/common/User_Concepts.html Important User Concepts]
 +
* [http://www.linuxcnc.org/docs/2.5/html/gcode/machining_center.html CNC Machine Overview]
 +
* [http://www.linuxcnc.org/docs/2.5/html/gui/axis.html Axis GUI]
 +
* [http://www.linuxcnc.org/docs/2.5/html/gcode/coordinates.html Coordinate System]
 +
* [http://www.probotix.com/wiki/index.php/G64 G64]
 +
*[http://www.linuxcnc.org/docs/2.6/html/gcode/tool_compensation.html Tool Compensation]
 +
 
 +
== G-code Programming ==
 +
 
 +
* [http://www.linuxcnc.org/docs/2.6/html/gcode/overview.html G Code Overview]
 +
* [http://www.linuxcnc.org/docs/2.6/html/gcode/gcode.html G Codes]
 +
* [[G-Code Cheatsheet]]
 +
* [http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Simple_LinuxCNC_G-Code_Generators G-Code Generators]
 +
 
 +
== Other ==
 +
*[http://linuxcnc.org/docs/html/man/man9/ HAL Modules]
 +
* [http://old-releases.ubuntu.com/ubuntu/dists/ LinuxCNC Archives]
 +
* [http://www.probotix.com/wiki/images/5/5c/G-codes.pdf Printable G-code Quick Reference]
 +
* [http://www.linuxcnc.org/docs/2.5/html/ Complete LinuxCNC Documentation]
 +
* http://www.vdwalle.com/Norte/
 +
* http://gnipsel.com/linuxcnc/index.html
 +
* https://www.youtube.com/watch?v=Bn8T5Fw0ISs
 +
* http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Adding_Camview
 +
*[http://www.vdwalle.com/Norte/Second%20Parport.htm Parallel Ports]

Revision as of 11:39, 27 February 2020

Most of the below links will direct you to LinuxCNC's own incredibly helpful wiki.

Setup

This step is not necessary for any of our Galaxy or GX series machines as they include a control PC with LinuxCNC already installed and configured.

Intro Video

FAQs

Using LinuxCNC

G-code Programming

Other