Difference between revisions of "LinuxCNC"
From PROBOTIX :: wiki
| Line 8: | Line 8: | ||
* [http://www.linuxcnc.org/docs/2.5/html/config/stepconf.html Stepper Configuration Wizard] | * [http://www.linuxcnc.org/docs/2.5/html/config/stepconf.html Stepper Configuration Wizard] | ||
* [http://www.linuxcnc.org/docs/2.5/html/common/Stepper_Diagnostics.html Stepper Diagnostics] | * [http://www.linuxcnc.org/docs/2.5/html/common/Stepper_Diagnostics.html Stepper Diagnostics] | ||
| − | |||
== Using LinuxCNC == | == Using LinuxCNC == | ||
Latest revision as of 13:04, 22 December 2020
Most of the below links will direct you to LinuxCNC's own incredibly helpful wiki.
Setup
This step is not necessary for any of our Galaxy or GX series machines as they include a control PC with LinuxCNC already installed and configured.
- System Requirements
- Getting LinuxCNC
- Stepper Quickstart
- Stepper Configuration Wizard
- Stepper Diagnostics
Using LinuxCNC
- User Foreword
- LinuxCNC User Introduction
- Running LinuxCNC
- Important User Concepts
- CNC Machine Overview
- Axis GUI
- Coordinate System
- G64
- Tool Compensation
G-code Programming
Other
- HAL Modules
- LinuxCNC Archives
- Printable G-code Quick Reference
- Complete LinuxCNC Documentation
- http://www.vdwalle.com/Norte/
- http://gnipsel.com/linuxcnc/index.html
- https://www.youtube.com/watch?v=Bn8T5Fw0ISs
- http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Adding_Camview
- Parallel Ports
- PCI Parallel Port Cards