LinuxCNC 2.9.2 on Debian 12
From PROBOTIX :: wiki
Revision as of 15:56, 9 May 2024 by Admin (Talk | contribs) (Admin moved page LinuxCNC 2.9.2 to LinuxCNC 2.9.2 on Debian 12)
Before starting you will need:
- 8GB (or larger) FAT32 formatted USB drive
- Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.iso
- Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe
Create the Bootable USB Drive
Note: The following directions are to be done on an Internet connected Windows computer.
Using Win32DiskImager
- step 1
- step 2