Actions

Difference between revisions of "PROBOTIX Universal LinuxCNC Configurator"

From PROBOTIX :: wiki

Line 8: Line 8:
 
-->
 
-->
 
Before starting you will need:  
 
Before starting you will need:  
* Download the Configurator: [[Media:Configurator-GX-4.1.zip | Configurator-GX-4.1.zip]] - ''last updated {{RevisionDate| File:Configurator-GX-4.1.zip }}''
+
* Download the Configurator: [[Media:Configurator-GX-4.2.zip | Configurator-GX-4.2.zip]] - ''last updated {{RevisionDate| File:Configurator-GX-4.1.zip }}''
 
* Minimum 8GB USB thumb drive formatted as FAT32
 
* Minimum 8GB USB thumb drive formatted as FAT32
  

Revision as of 11:10, 19 October 2019


This script will reconfigure the LinuxCNC software to add or remove features on your machine and has additional functionality to manage the most common problems in the hopes of maximizing uptime on your machine. Follow the on screen prompts carefully, but do not worry if you make a mistake as you can simply re-run the script to correct any errors. Before starting you will need:

  • Download the Configurator: Configurator-GX-4.2.zip - last updated 2019-10-16
  • Minimum 8GB USB thumb drive formatted as FAT32

Getting Started

  1. Copy the Probotix-GX.zip file to the USB thumb drive.
  2. Insert the thumb drive into the LinuxCNC PC. After a few seconds a window will pop up displaying the contents of the thumb drive. Right click on the Probotix-GX.zip file and choose the "Extract Here" option. Do NOT copy this to the desktop!
  3. Double-click on the newly created Probotix-GX folder to open.
  4. Find and double-click on the probotix.sh file.
  5. A dialog will pop up and ask you what you want to do with the file. Chose the "Run in Terminal" option.

Screen Prompts

Type the number of the screen option you wish to select then press Enter

Changes made by Configurator

Probotix Axis v2.0
  • Installs the GX Series version of the Probotix Axis Interface
  • Changes color of terminal window to classic linux shell green on black
  • Installs php scripting engine
  • Installs numlockx to force numlock key on
  • Installs samba for networking
  • Installs g-code-filter.php to clean up .ngc2 files
  • Tries to identify secondary parallel port address, copies lspci -v output to thumb drive in case you need to email it to us
  • Disables screensaver and idle screen lock
  • Removes the update manager to prevent non-Probotix updates from installing
  • Turns on line numbers and auto-indent in gedit
  • Assigns [q] key to toggle pause/resume - works like feed hold on machining centers