Actions

Difference between revisions of "Touch Probe"

From PROBOTIX :: wiki
m (Admin moved page Probing to Touch Probe)
 
(16 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
http://www.craftycnc.com/touch-probes/
+
Probes:
 +
* http://www.craftycnc.com/touch-probes/
 +
* https://drewtronics.org
 +
* http://www.deepgroove1.com/probe/probe.htm (appears to no longer be making probes)
  
−
http://www.ebay.com/itm/171912530881
+
Styli:
 +
* https://www.carbideprobes.com
 +
* https://store.hexagonmetrology.us/styli
 +
* https://www.itpstyli.com/
  
−
http://meshlab.sourceforge.net/
+
Mesh Software:
 +
* http://meshlab.sourceforge.net/
 +
 
 +
Probing G-code Routines:
 +
* http://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G38-probe
 +
* http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Touch_Probe
 +
* http://www.timeguy.com/cradek/01262579508
 +
* http://lab.whitequark.org/notes/2014-07-06/g38-probing-workpieces-in-linuxcnc/
 +
* http://www.scorchworks.com/Blog/auto-probing-with-g-code-ripper/
 +
* http://www.scorchworks.com/Gcoderipper/gcoderipper.html
 +
* https://forum.linuxcnc.org/49-basic-configuration/29187-work-with-probe
 +
 
 +
 
 +
== Included with LinuxCNC ==
 +
LinuxCNC is distributed with gridprobe.ngc and smartprobe.ngc
 +
 
 +
<pre>
 +
( gridprobe.ngc                                                        )
 +
( Rectangular Probing                                                  )
 +
(                                                                      )
 +
( This program repeatedly probes in a regular XY grid and writes the    )
 +
( probed location to the file 'probe-results.txt' in the same directory )
 +
( as the .ini file                                                      )
 +
 
 +
(Configuration section)
 +
G20  (Inches)
 +
F4    (probe speed)
 +
 
 +
#1=0  (X start)
 +
#2=.25 (X increment)
 +
#3=13 (X count)
 +
 
 +
#4=0
 +
#5=.25
 +
#6=5 (Y count)
 +
 
 +
#7=.1 (Z safety)
 +
#8=-.5 (Z probe)
 +
(End configuration section)
 +
 
 +
(PROBEOPEN probe-results.txt)
 +
#9=0 #10=0
 +
G0Z#7
 +
O1 while [#9 lt #6]
 +
    #10=0
 +
    G0 Y[#4+#5*#9]
 +
    O2 while [#10 lt #3]
 +
        O3 if [[#9/2] - fix[#9/2] eq 0]
 +
            G0X[#1+#2*#10]
 +
        O3 else     
 +
            G0X[#1+#2*[#3-#10-1]]
 +
        O3 endif
 +
        G38.2Z#8
 +
        G0Z#7
 +
        #10=[#10+1]
 +
    O2 endwhile
 +
    #9=[#9+1]
 +
O1 endwhile
 +
 
 +
(PROBECLOSE)
 +
G0Z#7
 +
G0X#1Y#4
 +
M2
 +
</pre>
 +
 
 +
 
 +
<pre>
 +
(probe-hole.ngc)
 +
O<probe-hole> sub
 +
G20 F25
 +
 
 +
#1000=#1 ;max radius
 +
 
 +
G91 G38.3 Z.00001
 +
#1001=#5061
 +
#1002=#5062
 +
 
 +
G91 G38.2 X#1000
 +
#1003=#5061
 +
G90 G0 X#1001
 +
G91 G38.2 X[0-#1000]
 +
#1004=#5061
 +
#1001=[[#1003+#1004]/2]
 +
G90 G0 X#1001
 +
 
 +
G91 G38.2 Y#1000
 +
#1005=#5062
 +
G90 G0 Y#1002
 +
G91 G38.2 Y[0-#1000]
 +
#1006=#5062
 +
#1002=[[#1005+#1006]/2]
 +
G90 G0 Y#1002
 +
 
 +
 
 +
G91 G38.2 X#1000
 +
#1003=#5061
 +
G90 G0 X#1001
 +
G91 G38.2 X[0-#1000]
 +
#1004=#5061
 +
#1001=[[#1003+#1004]/2]
 +
G90 G0 X#1001
 +
 
 +
G91 G38.2 Y#1000
 +
#1005=#5062
 +
G90 G0 Y#1002
 +
G91 G38.2 Y[0-#1000]
 +
#1006=#5062
 +
#1002=[[#1005+#1006]/2]
 +
G90 G0 Y#1002
 +
 
 +
 
 +
F0.1
 +
 
 +
G90 G0 X[#1003-0.005]
 +
G91 G38.2 X0.010
 +
#1003=#5061
 +
G90 G0 X[#1004+0.005]
 +
G91 G38.2 X-0.010
 +
#1004=#5061
 +
#1001=[[#1003+#1004]/2]
 +
G90 G0 X#1001
 +
 
 +
G90 G0 Y[#1005-0.005]
 +
G91 G38.2 Y0.010
 +
#1005=#5062
 +
G90 G0 Y[#1006+0.005]
 +
G91 G38.2 Y-0.010
 +
#1006=#5062
 +
#1002=[[#1005+#1006]/2]
 +
G90 G0 Y#1002
 +
G91 G1 F1 X[0-#5071] Y[0-#5072]
 +
G90
 +
 
 +
#1007=[#1003-#1004+[6.0/25.4]]
 +
#1008=[#1005-#1006+[6.0/25.4]]
 +
#1009=[[#1007+#1008]/2]
 +
#1010=[atan[#1002]/[#1001]]
 +
#1011=[sqrt[[#1001*#1001]+[#1002*#1002]]]
 +
 
 +
(debug,Dia #1009 Ang #1010 Dist #1011)
 +
O<probe-hole> endsub
 +
</pre>
 +
 
 +
 
 +
<pre>
 +
( smartprobe.ngc                                                        )
 +
( Rectangular Probing                                                  )
 +
(                                                                      )
 +
( This program repeatedly probes in a regular XY grid and writes the    )
 +
( probed location to the file 'probe-results.ngc' in the same directory )
 +
( as the .ini file                                                      )
 +
 
 +
(Configuration section)
 +
G20  (Inches)
 +
F20    (probe speed)
 +
 
 +
#1=-1  (X start)
 +
#2=.04 (X increment)
 +
#3=51 (X count)
 +
 
 +
#4=-1
 +
#5=.04
 +
#6=51 (Y count)
 +
 
 +
#7=1.1 (Z safety)
 +
#8=-.1 (Z probe)
 +
(End configuration section)
 +
 
 +
(LOGOPEN,probe-results.ngc)
 +
#9=0 #10=0
 +
G0Z#7
 +
O1 while [#9 lt #6]
 +
    #10=0
 +
    G0 Y[#4+#5*#9]
 +
    O2 while [#10 lt #3]
 +
        O3 if [[#9/2] - fix[#9/2] eq 0]
 +
            #11=[#1+#2*#10]
 +
        O3 else     
 +
            #11=[#1+#2*[#3-#10-1]]
 +
        O3 endif
 +
        (#11 is X target)
 +
        #5070=1
 +
        O4 while [#5070 NE 0]
 +
            G38.5 z#7
 +
            G38.3 x#11
 +
        O4 endwhile
 +
 
 +
        G38.2Z#8
 +
        (LOG,G1 X#5061 Y#5062 Z#5063)
 +
        #10=[#10+1]
 +
    O2 endwhile
 +
    G0Z#7
 +
    #9=[#9+1]
 +
O1 endwhile
 +
 
 +
(LOGCLOSE)
 +
G0Z#7
 +
G0X#1Y#4
 +
M2
 +
</pre>

Latest revision as of 08:16, 10 November 2019

Probes:

Styli:

Mesh Software:

Probing G-code Routines:


Included with LinuxCNC

LinuxCNC is distributed with gridprobe.ngc and smartprobe.ngc 

( gridprobe.ngc                                                         )
( Rectangular Probing                                                   )
(                                                                       )
( This program repeatedly probes in a regular XY grid and writes the    )
( probed location to the file 'probe-results.txt' in the same directory )
( as the .ini file                                                      )

(Configuration section)
G20   (Inches)
F4    (probe speed)

#1=0  (X start)
#2=.25 (X increment)
#3=13 (X count)

#4=0
#5=.25
#6=5 (Y count)

#7=.1 (Z safety)
#8=-.5 (Z probe)
(End configuration section)

(PROBEOPEN probe-results.txt)
#9=0 #10=0
G0Z#7
O1 while [#9 lt #6]
    #10=0
    G0 Y[#4+#5*#9]
    O2 while [#10 lt #3]
        O3 if [[#9/2] - fix[#9/2] eq 0]
            G0X[#1+#2*#10]
        O3 else      
            G0X[#1+#2*[#3-#10-1]]
        O3 endif
        G38.2Z#8
        G0Z#7
        #10=[#10+1]
    O2 endwhile
    #9=[#9+1]
O1 endwhile

(PROBECLOSE)
G0Z#7
G0X#1Y#4
M2



(probe-hole.ngc)
O<probe-hole> sub
G20 F25

#1000=#1 ;max radius

G91 G38.3 Z.00001
#1001=#5061
#1002=#5062

G91 G38.2 X#1000
#1003=#5061
G90 G0 X#1001
G91 G38.2 X[0-#1000]
#1004=#5061
#1001=[[#1003+#1004]/2]
G90 G0 X#1001

G91 G38.2 Y#1000
#1005=#5062
G90 G0 Y#1002
G91 G38.2 Y[0-#1000]
#1006=#5062
#1002=[[#1005+#1006]/2]
G90 G0 Y#1002


G91 G38.2 X#1000
#1003=#5061
G90 G0 X#1001
G91 G38.2 X[0-#1000]
#1004=#5061
#1001=[[#1003+#1004]/2]
G90 G0 X#1001

G91 G38.2 Y#1000
#1005=#5062
G90 G0 Y#1002
G91 G38.2 Y[0-#1000]
#1006=#5062
#1002=[[#1005+#1006]/2]
G90 G0 Y#1002


F0.1

G90 G0 X[#1003-0.005]
G91 G38.2 X0.010
#1003=#5061
G90 G0 X[#1004+0.005]
G91 G38.2 X-0.010
#1004=#5061
#1001=[[#1003+#1004]/2]
G90 G0 X#1001

G90 G0 Y[#1005-0.005]
G91 G38.2 Y0.010
#1005=#5062
G90 G0 Y[#1006+0.005]
G91 G38.2 Y-0.010
#1006=#5062
#1002=[[#1005+#1006]/2]
G90 G0 Y#1002
G91 G1 F1 X[0-#5071] Y[0-#5072]
G90

#1007=[#1003-#1004+[6.0/25.4]]
#1008=[#1005-#1006+[6.0/25.4]]
#1009=[[#1007+#1008]/2]
#1010=[atan[#1002]/[#1001]]
#1011=[sqrt[[#1001*#1001]+[#1002*#1002]]]

(debug,Dia #1009 Ang #1010 Dist #1011)
O<probe-hole> endsub



( smartprobe.ngc                                                        )
( Rectangular Probing                                                   )
(                                                                       )
( This program repeatedly probes in a regular XY grid and writes the    )
( probed location to the file 'probe-results.ngc' in the same directory )
( as the .ini file                                                      )

(Configuration section)
G20   (Inches)
F20    (probe speed)

#1=-1  (X start)
#2=.04 (X increment)
#3=51 (X count)

#4=-1
#5=.04
#6=51 (Y count)

#7=1.1 (Z safety)
#8=-.1 (Z probe)
(End configuration section)

(LOGOPEN,probe-results.ngc)
#9=0 #10=0
G0Z#7
O1 while [#9 lt #6]
    #10=0
    G0 Y[#4+#5*#9]
    O2 while [#10 lt #3]
        O3 if [[#9/2] - fix[#9/2] eq 0]
            #11=[#1+#2*#10]
        O3 else      
            #11=[#1+#2*[#3-#10-1]]
        O3 endif
        (#11 is X target)
        #5070=1
        O4 while [#5070 NE 0]
            G38.5 z#7
            G38.3 x#11
        O4 endwhile

        G38.2Z#8
        (LOG,G1 X#5061 Y#5062 Z#5063)
        #10=[#10+1]
    O2 endwhile
    G0Z#7
    #9=[#9+1]
O1 endwhile

(LOGCLOSE)
G0Z#7
G0X#1Y#4
M2
Retrieved from "https://www.probotix.com/wiki/index.php?title=Touch_Probe&oldid=14406"