Difference between revisions of "Vectric"
From PROBOTIX :: wiki
m (→Vectric Post Processors) |
(→Post Processors) |
||
| Line 26: | Line 26: | ||
| Standard Inch | | Standard Inch | ||
| [[Media:PROBOTIX_LinuxCNC_Arc_Inch.zip | Spindle]] | | [[Media:PROBOTIX_LinuxCNC_Arc_Inch.zip | Spindle]] | ||
| − | |||
|- | |- | ||
| Rotary 4th Axis | | Rotary 4th Axis | ||
| [[Media:PROBOTIX_LinuxCNC_Wrap_XtoA_inch.zip | Spindle]] | | [[Media:PROBOTIX_LinuxCNC_Wrap_XtoA_inch.zip | Spindle]] | ||
| − | |||
|- | |- | ||
| ATLaS | | ATLaS | ||
Revision as of 11:08, 15 February 2020
Information
The following zip files contain a post processor for use with LinuxCNC. Each post is provided in Inch units and specialized to work on Probotix machines.
Post Processors
| Standard Inch | Spindle |
| Rotary 4th Axis | Spindle |
| ATLaS | Spindle |
Installation
- Unzip the downloaded zip file to extract the
*.ppfile. - Copy or move this file into the MyPostP folder.
- File > Open Application Data Folder
- Some versions of Vectric software allow direct installation via Toolpaths > Install PostProcessor...
- After placing the file in the folder, restart the Vectric software.
- The PROBOTIX post processor will now show up in the drop-down list when you save your g-code.
Helpful Links
For help finding the MyPostP folder, see here: http://support.vectric.com/aspire-questions/item/where-to-find-post-processors-folder-on-pc
Old forum topic for editing Vectric post processors: http://forum.vectric.com/viewtopic.php?f=4&t=6213
Old PDF for editing Vectric post processors: http://forum.vectric.com/download/file.php?id=13820