Actions

Vectric

From PROBOTIX :: wiki

Revision as of 16:30, 16 December 2020 by Admin (Talk | contribs) (Post Processors)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Information

The following zip files contain a post processor for use with LinuxCNC. Each post is provided in Inch units and specialized to work on Probotix machines.

Post Processors

Standard Inch Spindle
Rotary 4th Axis Spindle
ATLaS Spindle
Laser Spindle

Installation

  1. Unzip the downloaded zip file to extract the *.pp file.
  2. Copy or move this file into the MyPostP folder.
    • File > Open Application Data Folder
    • Some versions of Vectric software allow direct installation via Toolpaths > Install PostProcessor...
  3. After placing the file in the folder, restart the Vectric software.
    • The PROBOTIX post processor will now show up in the drop-down list when you save your g-code.

Helpful Links

For help finding the MyPostP folder, see here: http://support.vectric.com/aspire-questions/item/where-to-find-post-processors-folder-on-pc

Old forum topic for editing Vectric post processors: http://forum.vectric.com/viewtopic.php?f=4&t=6213

Old PDF for editing Vectric post processors: http://forum.vectric.com/download/file.php?id=13820