View source for Legacy Machine LinuxCNC Configuration

[[Category:LinuxCNC Configurations]]

= How to Install Configurations =

== Using Script File ==
You will need to unzip the file onto your desktop of the machine computer. Open the folder and double click the file named probotix.sh then click run in terminal when prompted. 

This will launch terminal and start by asking for a password. Type 'probotix' and hit enter. If prompted for yes or no, type 'y' and hit enter. At the end it will ask you to select which config you will be using. Find your machine in the list and choose either the regular or VFD version. 

The install is now complete and a new link is on your desktop. 

== Manual Install ==
If the script file fails you can also manually move the files. Go to "Places" => "Home Folder" => "LinuxCNC" => "Configs" Once you are in the configs folder you will place the folder that contains the configs here("Probotix_2015","Probotix_Pre_2015", or "Probotix_Unity_Conversion"). Ignore the extra files and folders inside the zip file.

Then you will go to "Application" => "CNC" => "LinuxCNC" => then select the configuration you want to use. In the lower left of the configuration selection window, you have the option to create a desktop short cut. This is recommended for easy access to the program.

= Machine Configurations =
*Standard (imperial) units are default unless configuration specifies Metric
*2015 in the file name are for machines built after 2015 OR machines retrofitted with Bipolar drivers and wiring
*If you do not know what configuration to use, contact [mailto:support@probotix.com PROBOTIX]

== Legacy Machines ==
=== V90 ===
This file will need to be adjusted to match the performance of your machine. 
[[File:V90.zip]]

=== X90 ===
This file will need to be adjusted to match the performance of your machine. 
[[File:X90.zip]]

<!--
== Fireball Series Machines ==
Here are the config files for the Comet, Asteroid, Meteor and Nebula(MeteorXL) CNC machines.

*TS in the file name is only for machines with a Tool Sensor
*4A in the file name is only for machines with a 4th/Rotary Axis
*Standard (imperial) units are default unless configuration specifies Metric
*2015 in the file name are for machines built after 2015 OR machines retrofitted with Bipolar drivers and wiring
*If you do not know what configuration to use, contact PROBOTIX

=== 2015 ===
[[File:Probotix_2015_install.zip]]

=== Pre-2015 with Unity Controller ===
[[File:Probotix_Unity_Conversion_install.zip]]

=== Pre-2015 with Beige Controller ===
[[File:Probotix_Pre_2015_install.zip]]
-->