View source for Sunfar E300 VFD

[[Category:Spindles and VFDs]]
= Sunfar E300 VFD =
[[File:VFD_Sunfar_E300.jpg|thumb|400px|alt=Sunfar E300 VFD Wiring|Sunfar E300 VFD Wiring Diagram]]
[[Media:Sunfar_VFD.pdf | Sunfar E300 VFD Manual]]

== To change settings ==
# Press [SET]
# Use arrow keys to change to program number your looking to change
# Press [SET]
# Use the arrow keys to change the value to appropriate value
# Press [SET] to save the value
# Press [ESC] to exit programming mode

== Settings needed for Galaxy series machines ==
* F0.00 = 1 (for 0-10V Control) or 3 (for knob control)
* F0.02 = 1000 (for panel [RUN] button)
* F0.04= 400 (Spindle Frequency) 
* F0.05 = 5.0 (Acceleration time) 
* F0.12 = 400 (Basic Frequency)
* F0.13 = 220 (Volts) 
* F1.03 = 400 (Max Frequency)
* F1.07=1 
* F1.08=2 
* F1.09=3