PROBOTIX :: wiki PROBOTIX :: wiki

Sunfar E300 VFD

Sunfar E300 VFD Wiring Diagram

Sunfar E300 VFD Manual

To change settings

1. Press [SET]
2. Use arrow keys to change to program number your looking to change
3. Press [SET]
4. Use the arrow keys to change the value to appropriate value
5. Press [SET] to save the value
6. Press [ESC] to exit programming mode

Settings needed for Galaxy series machines

• F0.00 = 1 (for 0-10V Control) or 3 (for knob control)
• F0.02 = 1000 (for panel [RUN] button)
• F0.04= 400 (Spindle Frequency)
• F0.05 = 5.0 (Acceleration time)
• F0.12 = 400 (Basic Frequency)
• F0.13 = 220 (Volts)
• F1.03 = 400 (Max Frequency)
• F1.07=1
• F1.08=2
• F1.09=3