View source for Sunfar E500 VFD

[[Category:Spindles and VFDs]]
= Sunfar E500 VFD =
[[File:VFD_Sunfar_E500.jpg|thumb|400px|alt=Sunfar E500 VFD Wiring|Sunfar E500 VFD Wiring Diagram]]
[[Media:SunfarE500.pdf | Sunfar E500 VFD Manual]]

== To change settings ==
# Press [SET]
# Use arrow keys to change to program number your looking to change
# Press [SET]
# Use the arrow keys to change the value to appropriate value
# Press [SET] to save the value
# Press [ESC] to exit programming mode

== Settings needed for Galaxy series machines ==
* F0.00 = 1 (for 0-10V Control) or 3 (for knob control)
* F0.02 = 1001 (for panel [RUN] button)
* F0.04= 400 (Spindle Frequency) 
* F0.05 = 5.0 (Acceleration time) 
* F0.11 = 0 (Torque Boost) 
* F0.12 = 400 (Basic Frequency)
* F0.13 = 220 (Volts)
* F1.00 = 0.4 (AI Lower Limit)
* F1.01 = 10 (AI Upper Limit)
* F1.03 = 0 (Min Freq)
* F1.04 = 400 (Max Freq)
* F1.08 = 11 (Terminal 1 Function)