Difference between revisions of "HT23-180-8"
From PROBOTIX :: wiki
(Created page with "HT23-180-8 High Torque Stepper Motor 185 OzIn Hybrid Design 1.8 deg / 200 Steps Per Revolution") |
|||
| (22 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | HT23-180-8 | + | [[Category:Stepper Motors]] |
| − | High Torque Stepper Motor | + | [[File:HT23-180-8.jpg|200px]] |
| − | 185 OzIn Hybrid Design | + | |
| − | 1.8 deg / 200 Steps Per Revolution | + | =NEMA 23 Blue 180 Oz/In Stepper Motor= |
| + | |||
| + | *High Torque Stepper Motor | ||
| + | |||
| + | *185 OzIn Hybrid Design | ||
| + | |||
| + | *1.8 deg / 200 Steps Per Revolution | ||
| + | |||
| + | =Specs= | ||
| + | {| class="wikitable" | ||
| + | |+Specifications | ||
| + | |- | ||
| + | |Description | ||
| + | |Parallel | ||
| + | |Series | ||
| + | |UniPolar | ||
| + | |- | ||
| + | |- | ||
| + | |Holding Torque (N.m +-10%) | ||
| + | |185 | ||
| + | |185 | ||
| + | |127 | ||
| + | |- | ||
| + | |Rated Current (Amps/Phase) | ||
| + | |2.5 | ||
| + | |1.3 | ||
| + | |1.8 | ||
| + | |- | ||
| + | |Resistance (ohm/phase +- 10%) | ||
| + | |0.62 | ||
| + | |1.46 | ||
| + | |1.23 | ||
| + | |- | ||
| + | |Inductance(mH/phase +-20%) | ||
| + | |2.4 | ||
| + | |9.6 | ||
| + | |2.4 | ||
| + | |- | ||
| + | |Rotor Inertia (g.cm 2) | ||
| + | |300 | ||
| + | |300 | ||
| + | |300 | ||
| + | |- | ||
| + | |Motor Weight | ||
| + | |0.7 kg/1.43 lb | ||
| + | |0.7 kg/1.43 lb | ||
| + | |0.7 kg/1.43 lb | ||
| + | |- | ||
| + | |Motor Length | ||
| + | |56 mm/2.205 in | ||
| + | |56 mm/2.205 in | ||
| + | |56 mm/2.205 in | ||
| + | |- | ||
| + | |Number of Wires | ||
| + | |8 | ||
| + | |8 | ||
| + | |8 | ||
| + | |||
| + | |} | ||
| + | |||
| + | =Motor Phase Wiring= | ||
| + | [[File:HT23-180-8_phasewiring.jpg]] | ||
| + | |||
| + | =Dimensions= | ||
| + | [[File:HT23-180_dims.jpg]] | ||
Latest revision as of 21:04, 8 March 2018
NEMA 23 Blue 180 Oz/In Stepper Motor
- High Torque Stepper Motor
- 185 OzIn Hybrid Design
- 1.8 deg / 200 Steps Per Revolution
Specs
| Description | Parallel | Series | UniPolar |
| Holding Torque (N.m +-10%) | 185 | 185 | 127 |
| Rated Current (Amps/Phase) | 2.5 | 1.3 | 1.8 |
| Resistance (ohm/phase +- 10%) | 0.62 | 1.46 | 1.23 |
| Inductance(mH/phase +-20%) | 2.4 | 9.6 | 2.4 |
| Rotor Inertia (g.cm 2) | 300 | 300 | 300 |
| Motor Weight | 0.7 kg/1.43 lb | 0.7 kg/1.43 lb | 0.7 kg/1.43 lb |
| Motor Length | 56 mm/2.205 in | 56 mm/2.205 in | 56 mm/2.205 in |
| Number of Wires | 8 | 8 | 8 |
Motor Phase Wiring
Dimensions
