Difference between revisions of "HT23-420-8"
From PROBOTIX :: wiki
(Created page with "File:HT23-420-8.pdf") |
|||
| (18 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | [[ | + | [[Category:Stepper Motors]] |
| + | ==GREEN MONSTER 420 OZ/IN Stepper Motor== | ||
| + | * NEMA23 | ||
| + | * 420 Oz/In Torque | ||
| + | * Hybrid Design | ||
| + | * 1.8 deg / 200 Steps Per Revolution | ||
| + | * 3/8" Shaft | ||
| + | |||
| + | |||
| + | =NEMA 23 Green Monster 420 Oz/In Stepper Motor= | ||
| + | {| class="wikitable" | ||
| + | |+Specifications | ||
| + | |- | ||
| + | |Description | ||
| + | |Parallel | ||
| + | |Series | ||
| + | |UniPolar | ||
| + | |- | ||
| + | |Holding Torque (N.m +-10%) | ||
| + | |300 N.cm Min | ||
| + | |300 N.cm Min | ||
| + | |215 N.cm Min | ||
| + | |- | ||
| + | |Rated Current (Amps/Phase) | ||
| + | |4.2 | ||
| + | |2.1 | ||
| + | |3.0 | ||
| + | |- | ||
| + | |Resistance (ohm/phase +- 10%) | ||
| + | |0.8 | ||
| + | |3.2 | ||
| + | |1.6 | ||
| + | |- | ||
| + | |Inductance(mH/phase +-20%) | ||
| + | |3.8 | ||
| + | |15.2 | ||
| + | |3.8 | ||
| + | |- | ||
| + | |Rotor Inertia (g.cm 2) | ||
| + | |800 | ||
| + | |800 | ||
| + | |800 | ||
| + | |- | ||
| + | |Motor Length | ||
| + | |154mm/6" | ||
| + | |154mm/6" | ||
| + | |154mm/6" | ||
| + | |- | ||
| + | |Motor Weight | ||
| + | |1.8kg/4lbs | ||
| + | |1.8kg/4lbs | ||
| + | |1.8kg/4lbs | ||
| + | |- | ||
| + | |Number of Wires | ||
| + | |8 | ||
| + | |8 | ||
| + | |8 | ||
| + | |- | ||
| + | |Shaft Size | ||
| + | |3/8" from 1/4" rear | ||
| + | |3/8" from 1/4" rear | ||
| + | |3/8" from 1/4" rear | ||
| + | |} | ||
| + | |||
| + | =Motor Phase Wiring= | ||
| + | [[File:420wiring.jpg]] | ||
| + | |||
| + | |||
| + | =Torque Curve= | ||
| + | [[File:420torque.jpg]] | ||
| + | |||
| + | =Dimensions= | ||
| + | [[File:420dims.jpg]] | ||
| + | |||
| + | =Dimensions 2= | ||
| + | [[File:420dims2.jpg]] | ||
Latest revision as of 21:03, 8 March 2018
Contents
GREEN MONSTER 420 OZ/IN Stepper Motor
- NEMA23
- 420 Oz/In Torque
- Hybrid Design
- 1.8 deg / 200 Steps Per Revolution
- 3/8" Shaft
NEMA 23 Green Monster 420 Oz/In Stepper Motor
| Description | Parallel | Series | UniPolar |
| Holding Torque (N.m +-10%) | 300 N.cm Min | 300 N.cm Min | 215 N.cm Min |
| Rated Current (Amps/Phase) | 4.2 | 2.1 | 3.0 |
| Resistance (ohm/phase +- 10%) | 0.8 | 3.2 | 1.6 |
| Inductance(mH/phase +-20%) | 3.8 | 15.2 | 3.8 |
| Rotor Inertia (g.cm 2) | 800 | 800 | 800 |
| Motor Length | 154mm/6" | 154mm/6" | 154mm/6" |
| Motor Weight | 1.8kg/4lbs | 1.8kg/4lbs | 1.8kg/4lbs |
| Number of Wires | 8 | 8 | 8 |
| Shaft Size | 3/8" from 1/4" rear | 3/8" from 1/4" rear | 3/8" from 1/4" rear |
Motor Phase Wiring
Torque Curve
Dimensions
Dimensions 2
