Revision as of 10:09, 9 February 2015

Configuration Files

You will need to unzip the file onto your desktop of the machine computer. You will then go to "Places" => "Home Folder" => "LinuxCNC" => "Configs" Once you are in the configs folder you will place the folder contained in the zip file into the configs folder.

Then you will go to "Application" => "CNC" => "LinuxCNC" => then select the configuration you want to use. In the lower left of the configuration selection window, you have the option to create a desktop short cut. This is recommended for easy access to the program.

• TS in the file name is only for machines with a Tool Sensor
• 4A in the file name is only for machines with a 4th/Rotary Axis
• Standard (imperial) units are default unless configuration specifies Metric
• 2015 in the file name are for machines built after 2015 OR machines retrofitted with Bipolar drivers and wiring
• If you do not know what configuration to use, contact PROBOTIX

Comet

File:Comet.zip

File:Comet 4th Axis.zip

File:Comet (metric).zip

Meteor

Uni polar, no Tool Sensor, Imperial: File:Meteor.zip

Bi polar, no Tool Sensor, Imperial: File:Meteor 2015.zip

Uni Polar, no Tool Sensor, 4th Axis, Imperial: File:Meteor 4th Axis.zip

Uni polar, no Tool Sensor, Metric: File:Meteor (metric).zip

Bi polar, no Tool Sensor, 4th Axis, Metric: File:Meteor 4A Metric 2015.zip

Uni polar, Tool Sensor, 4th Axis, Metric: File:Meteor4thTSMetric.zip

Uni polar, Tool Sensor, Imperial: File:MeteorTS.zip

Asteroid

Nebula

(former Meteor XL)

V90

This file will need to be adjusted to match the performance of your machine.

File:V90.zip

X90

This file will need to be adjusted to match the performance of your machine.

File:X90.zip