Difference between revisions of "Vectric"
From PROBOTIX :: wiki
m ("now" not "not") |
m |
||
| Line 1: | Line 1: | ||
== Information == | == Information == | ||
| + | The following zip files contain a post processor for use with LinuxCNC. Each post is provided in Inch units and specialized to work on Probotix machines. | ||
== Post Processors == | == Post Processors == | ||
| − | + | === Standard Inch Post Processor === | |
| + | : [[File:PROBOTIX_LinuxCNC_Arc_Inch.zip]] | ||
| + | === Rotary Axis Post Processor === | ||
| + | : [[File:PROBOTIX_LinuxCNC_Wrap_XtoA_inch.zip]] | ||
| + | === Automatic Tool Length Sensor === | ||
| + | : [[File:PROBOTIX_LinuxCNC_ATLaS_G64_Arc_Inch_TTS.zip]] | ||
| − | + | == Installation == | |
| − | + | # Unzip the downloaded zip file to extract the <code>*.pp</code> file. | |
| + | # Copy or move this file into the MyPostP folder. | ||
| + | #* '''File > Open Application Data Folder''' | ||
| + | #* Some versions of Vectric software allow direct installation via '''Toolpaths > Install PostProcessor...''' | ||
| + | # After placing the file in the folder, restart the Vectric software. | ||
| + | #* The PROBOTIX post processor will now show up in the drop-down list when you save your g-code. | ||
| − | + | == Helpful Links == | |
| − | + | For help finding the MyPostP folder, see here: http://support.vectric.com/aspire-questions/item/where-to-find-post-processors-folder-on-pc | |
| − | + | Old forum topic for editing Vectric post processors: | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
http://forum.vectric.com/viewtopic.php?f=4&t=6213 | http://forum.vectric.com/viewtopic.php?f=4&t=6213 | ||
| − | PDF for editing Vectric post processors: | + | Old PDF for editing Vectric post processors: |
http://forum.vectric.com/download/file.php?id=13820 | http://forum.vectric.com/download/file.php?id=13820 | ||
| − | |||
| − | |||
| − | |||
Revision as of 21:46, 7 September 2018
Contents
Information
The following zip files contain a post processor for use with LinuxCNC. Each post is provided in Inch units and specialized to work on Probotix machines.
Post Processors
Standard Inch Post Processor
Rotary Axis Post Processor
Automatic Tool Length Sensor
Installation
- Unzip the downloaded zip file to extract the
*.ppfile. - Copy or move this file into the MyPostP folder.
- File > Open Application Data Folder
- Some versions of Vectric software allow direct installation via Toolpaths > Install PostProcessor...
- After placing the file in the folder, restart the Vectric software.
- The PROBOTIX post processor will now show up in the drop-down list when you save your g-code.
Helpful Links
For help finding the MyPostP folder, see here: http://support.vectric.com/aspire-questions/item/where-to-find-post-processors-folder-on-pc
Old forum topic for editing Vectric post processors: http://forum.vectric.com/viewtopic.php?f=4&t=6213
Old PDF for editing Vectric post processors: http://forum.vectric.com/download/file.php?id=13820