Difference between revisions of "Vectric"

Latest revision as of 16:30, 16 December 2020

Information

The following zip files contain a post processor for use with LinuxCNC. Each post is provided in Inch units and specialized to work on Probotix machines.

Post Processors

Standard Inch	Spindle
Rotary 4th Axis	Spindle
ATLaS	Spindle
Laser	Spindle

Installation

Unzip the downloaded zip file to extract the *.pp file.
Copy or move this file into the MyPostP folder.
- File > Open Application Data Folder
- Some versions of Vectric software allow direct installation via Toolpaths > Install PostProcessor...
After placing the file in the folder, restart the Vectric software.
- The PROBOTIX post processor will now show up in the drop-down list when you save your g-code.

Helpful Links

For help finding the MyPostP folder, see here: http://support.vectric.com/aspire-questions/item/where-to-find-post-processors-folder-on-pc

Old forum topic for editing Vectric post processors: http://forum.vectric.com/viewtopic.php?f=4&t=6213

Old PDF for editing Vectric post processors: http://forum.vectric.com/download/file.php?id=13820

@@ Line 21: / Line 21: @@
 |}
 -->
-=== Standard Inch Post Processor ===
-: [[File:PROBOTIX_LinuxCNC_Arc_Inch.zip]]
-=== 4th Axis Rotary Post Processor ===
-: [[File:PROBOTIX_LinuxCNC_Wrap_XtoA_inch.zip]]
-=== ATLaS Automatic Tool Length Sensor ===
+{| class="wikitable"
-: [[File:PROBOTIX_LinuxCNC_ATLaS_G64_Arc_Inch_TTS.zip]]
+|-
+| Standard Inch
+| [[Media:PROBOTIX_LinuxCNC_Arc_Inch.zip | Spindle]]
+|-
+| Rotary 4th Axis
+| [[Media:PROBOTIX_LinuxCNC_Wrap_XtoA_inch.zip | Spindle]]
+|-
+| ATLaS
+| [[Media:PROBOTIX_LinuxCNC_ATLaS_G64_Arc_Inch_TTS.zip | Spindle]]
+|-
+| Laser
+| [[Media:PROBOTIX_LinuxCNC_Laser_Arcs_inch.zip | Spindle]]
+|}
 == Installation ==