Vectric
From PROBOTIX :: wiki
Revision as of 10:54, 1 November 2013 by Admin (Talk | contribs) (Created page with "== Information: == == Post Processors: == The zip file contains the post processor for use with LinuxCNC. A post is provided for Inch units. After you unzip the file, the fol...")
Information:
Post Processors:
The zip file contains the post processor for use with LinuxCNC. A post is provided for Inch units. After you unzip the file, the folder will contain the post processor for use with Cut2D, and Vcarve PRO. You will place these in the PostP folder under the Vectric program folder. When you restart software so the added post will be available as a machine language option.