V90 Mk2 CNC ROUTER

The V90 Mk2 is our new desktop sized CNC router. Gone are the days of assembling a machine from a box of parts. The new V90 Mk2 is fully assembled, calibrated, and tested. Extremely rigid with fully supported rails and all aluminum &  steel construction, this machine makes light work of woods, plastics, and composites; as well as aluminum and brass. The open frame design allows you to work on taller parts. Complete with cable chain wire management, limit/home switches, front mounted emergency stop switch, and a complete LinuxCNC control PC: no other machine in this size is as complete or ready-to-run. Simply pull it out of the box, make a handful of electrical connections, mount your router, and GO.

Windows based control systems cannot compare to the rock solid performance and reliability of the LinuxCNC control system. Originally written by the National Institute of Standards and Technology (NIST) as a general purpose 9-axis machine controller that ran on Unix, LinuxCNC was released to the open-source community who ported it over to a modern Linux operating system. Not only simple to learn and simple to use, LinuxCNC is by far the most stable CNC control software available. When you need reliability, there is no other choice.

Want to speed up tool changes? Add our ATLaS Automatic Tool Length Sensor. If dust is an issue, our Cyclone Dust Collection System collects 90% of airborne particulates.

From the classroom to the workshop, from prototyping, to production - the V90 Mk2 sets a new standard for precision and performance.


Work Envelope
X Travel 20+ Inches
Y Travel 13+ Inches
Z Travel 5+ Inches
Performance
Maximum Speed 300 Inches Per Minute (per axis), 460 Inches Per Minute (combined)
Resolution 0.00125 Inches
Mechanical
Drive Mechanism 1/2" 5-Start ACME Screws w/ Anti-backlash Nuts
Linear Rails 16mm Fully Supported Rails on X & Y Axis, 16mm Open Rail on Z Axis
Machine Frame 3060M Aluminum T-slot Extrusion
Electrical
Control System Unity CNC Controller (5x 4.2Amp Bi-polar Drivers), LinuxCNC Control PC
Power Requirements 10A@110VAC for Control System, 20A@220VAC for optional VFD Spindle

V90 Mk2 CNC ROUTER

  • Brand: Galaxy Series
  • Product Code: GS-V90-MK2
  • Availability: In Stock
  • $2,499.00


Available Options


Tags: v90, mk2, cnc, routers